Ventahood 66" Wall Mounted Euro Style Range Hood
Model# EPTH18466
$5,673.99
- Style:
- Vent Hoods
- Height:
- 18 inches
- Width:
- 66 inches
- Depth:
- 24 inches
This Euroline Pro with squared lip is boldly designed to cover light residential, "commercial type" cooking equipment. To order a 27" depth, add an 'X' after 'EP' in the model number. The Euroline Pro Series with Emerald Lip is also available with a 26" wide x 14" deep top to allow for higher CFM requirements . Heat lamps are not available on this model. Click on the models for a list of our base model numbers for standard sizes; simply select the model you need, and then specify the finish [painted, stainless steel, real brass, real copper, or hammered copper]. Recommended mounting height is 30" from the cooking surface. Shown with matching wall mount duct cover [sold separately], available in standard sizes for 8', 9', and 10' ceiling heights or in custom sizes. All Vent-A-Hood products are suitable for use in damp locations [outdoor applications such as a covered patio] when installed in a GFCI protected branch circuit.
| WIDTH : | 66" |
| DEPTH : | 24" |
| HEIGHT : | 18" |
| CFM : | 1200 |
| SONES : | 6.6 |
| Amps : | 7.5 |
| Num. Lights : | 4 |
| ELECTRICAL/MECHANICAL SPECIFICATIONS FOR BLOWER UNIT | |
| Model | Two B200 Duals |
| Volts | 115 |
| Amps+ | 7.5 |
| Hz | 60 |
| RPM | 1550 |
| CFM SP@0.0" | 1200 |
| Equiv. CFM$ | 1800 |
| CFM SP@0.1" | 1062 |
| CFM SP@0.2" | 960 |
| CFM SP@0.3" | 860 |
| Min. Round Duct Size | 12" (113 sq. in.) |
| Sones# | 6.6 |
| Installation Instructions | Click here to download |
|---|---|
| Ducting and Parts | Click here to download |
| Back Venting Guide | Click here to download |
| Technical Specifications | Click here to download |
| Back Venting Guide | Click here to download |
| Dimension Diagram(EPTH18 - Premier Magic Lung(R) Euro Style Wall Mounted) | Click here to download |
| Dimension Diagram(EPTH18-466) | Click here to download |
| 1200 CFM Double B200 Dual Blowers (Top View) VP563 Standard Transition Installed (Front View) The transition shown (VP563) is installed in the hood at the factory as a standard item. It will be located in the exact center of the duct cover (left to right | Click here to download |
Enter Your Review:
Fields marked with an asterisk (*) are required.
CALIFORNIA RESIDENTS ONLY - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
